Explore Metal Deck Accessories From Oates Metal Deck and Building Products

Metal Deck Accessories

Deck Fasteners, Cell Closure, Pour Stop, and more

  • Fastener Options

  • Ridge Plates & Valley Plates

  • Sump Pan
  • Foam Closure
  • Cell Closure
  • Pour Stop
  • Girder Filler
  • Filler Sheet
  • J Closure
  • Flat Plate
  • Z Closure

At Oates Metal Deck, our expertise doesn’t stop at providing top-tier metal decking solutions. We extend our commitment to excellence through a comprehensive array of metal deck accessories required for a project’s success from start to finish. Understanding the vital role these accessories play in the installation and longevity of metal decking structures, we proudly offer a broad selection encompassing every necessary component.

At Oates Metal Deck, we are acutely aware of the complexities involved in metal decking projects. Our range of accessories, including fasteners and more, is curated to address the specific challenges and requirements of these projects. Our goal is to ensure that you have access to every possible need under one roof, contributing to the seamless execution and enduring success of your construction endeavors.

Proudly catering to all your metal decking needs, we invite you to explore the possibilities with our comprehensive selection of metal deck accessories. Whether you need cell closure or valley plates, Oates Metal Deck stands by to elevate your project with expertise, quality, and service.

Fasteners:

Explore Our Fastener Metal Deck Accessories Options

Most Common Deck Screws:

  • #10-16 x 3/4” HWH Tek 3 Side Lap Screw
  • #12-24 x 1-1/4” HWH Tek 5 Deck to Support Screw

Also Available

  • #12-14 x 3/4” HWH Tek 3 Side Lap Screw  
  • #12-14 x 3/4” HWH Tek 3 Side Lap Screw With Washer
  • #10-16 x 3/4” HWH Tek 3 Side Lap Screw With Washer
  • #12-24 x 1-1/4” HWH Tek 5 Deck to Support Screw With Washer

Weld washers for a 5/8” puddle weld

Fasteners are critical in the installation of structural steel deck, as they secure the deck panels to the supporting framework, ensuring stability, structural integrity, and load transfer. At Oates, we supply fasteners that meet the Buy American Act guidelines for construction materials and are Steel Deck Institute (SDI) and FM approved. These screws are designed for fast, reliable, and secure connections, enhancing the efficiency and durability of the installation. Here are some key advantages:

  • High Drilling Speed: Drill Screws feature advanced drilling points that allow them to penetrate steel quickly, reducing installation time. This makes them more efficient than traditional fasteners, which may require pre-drilling or slower drilling speeds.
  • Superior Holding Power: The screws are engineered for high pull-out and shear strength, providing a strong, lasting connection between the steel deck and supporting members. This enhanced holding power is especially valuable in structural applications where stability is crucial.
  • Consistent Performance on Thick Materials: These screws are capable of drilling through thicker steel and other dense materials with ease. Their design prevents jamming or snapping, making them suitable for a variety of deck types and thicknesses without the need to switch fastener types.
  • Corrosion Resistance: Drill have a proprietary corrosion-resistant coating. This protects against rust and weathering, extending the life of the fasteners and ensuring long-term structural integrity in exposed or moist environments.
  • Self-Drilling Capability: The self-drilling feature eliminates the need for pre-drilling holes, which saves time and effort. This also reduces the risk of misalignment and helps achieve a cleaner, faster installation.
  • Consistent Torque and Drive Control: The screws are designed to ensure consistent drive performance, meaning they can achieve a tight fit without over-torquing or stripping. This improves the overall quality and uniformity of the installation.
  • Wide Range of Sizes and Options: We offer a variety of sizes, point types, and head styles, allowing for flexibility in different applications. This ensures the installer can choose the best screw for the specific project requirements, enhancing overall efficiency and reliability.
  • Reduced Risk of Loosening Over Time: With their superior design and strong connections, our screws provide greater resistance to loosening over time, which is critical in structural applications where long-term stability is essential.
  • Water Tight Sealing: EPDM (ethylene propylene diene monomer) washers and flange head EPDM washers are available to enhance the waterproof properties of the installation, preventing leaks and moisture damage.
  • Require Minimal Maintenance: Fasteners designed for metal decking systems demand little upkeep when installed correctly, ensuring a cost-effective and low-maintenance solution.

In summary, our screws provide time-saving, high-strength, corrosion-resistant, and versatile fastening solutions for structural steel deck installation. These qualities make them a preferred choice for builders looking for reliable, durable, and efficient fasteners in structural projects.

Metal Deck Fasteners | Oates Metal Deck

Enhance your metal decking projects with Oates Metal Deck accessories.

Choose Us for Unmatched Quality and Performance

Composite Floor/Form Deck Accessories

Explore Our Comprehensive Options

  • Cell Closure / End Closure
  • Pour Stop
  • Girder Filler
  • Filler Sheet
  • J Closure
  • Flat Plate / Butt Strip
  • Z Closure / Zee Closure

  • Cell Closure / End Closure
    • Function: Designed to close the open cells at the ends of composite deck panels.
    • Benefits: Prevents concrete from spilling through the deck flutes during the pouring process, contributing to a cleaner, more efficient construction site. It also enhances the aesthetic finish of the deck edges.
  • Pour Stop
    • Function: Acts as a perimeter boundary to contain concrete during the pouring phase.
    • Benefits: Ensures precise concrete placement and thickness, preventing overspill and waste. It also contributes to the structural integrity by providing additional support along the deck perimeter.
  • Girder Filler
    • Function: Utilized to fill gaps between girders and the edge of deck panels.
    • Benefits: Enhances load distribution across the deck, improving the structural integrity and stability of the flooring system. It also contributes to a more uniform appearance of the deck surface.
  • Filler Sheet
    • Function: Sheets used to fill in areas of the deck where standard panels may not fit properly.
    • Benefits: Ensures a complete and contiguous deck surface, eliminating potential weak spots and contributing to the overall aesthetic and structural performance of the deck.
  • J Closure
    • Function: Designed to cap the edge of exposed metal decking, creating a finished look.
    • Benefits: Protects the deck edges from corrosion and wear while also providing a safer environment by covering sharp edges. This enhances both the longevity and the safety of the metal deck.
  • Flat Plate
    • Function: Also referred to as column closure, flat plates are utilized to enclose an area surrounding a column prior to the pouring of concrete.
    • Benefits: Ensures a complete and contiguous deck surface to prevent concrete from seeping between the column and the deck. 
  • Z Closure
    • Function: Acts as a final touch to seal the open edges of metal decking, ensuring a snug fit and providing support for the panels.
    • Benefits: Ensures a tight seal along the edges, preventing concrete seepage to the floor below. It also contributes to the refined aesthetic of the project’s perimeter.

Our comprehensive suite of composite form deck accessories exemplifies our commitment to enhancing the efficiency, durability, and aesthetics of construction projects. By offering specialized solutions such as cell closure, pour stop, girder filler, and various other essential components, Oates Metal Deck and Building Products ensures that every aspect of your decking project is supported with precision-engineered products.

In addition to our extensive line of metal deck accessories, Oates Metal Deck and Building Products proudly offers a comprehensive selection of composite floor/form deck accessories. These accessories are integral to creating solid and effective composite deck installations. From cell closure to pour stop, our offerings are crafted to enhance every aspect of your composite decking project.

Our composite floor/form deck accessories are designed to seamlessly integrate with our metal decking solutions, providing a comprehensive approach to construction projects. By enhancing the structural integrity and facilitating the installation process, these accessories not only speed up construction timelines but also ensure long-lasting durability and performance of the finished deck. Whether your project demands standard sizes or custom solutions, Oates Metal Deck and Building Products is ready to supply the highest quality accessories tailored to your specific requirements.

Roof Deck Accessories:

Explore Metal Deck Accessories

  • Ridge Plate and Valley Plate
  • Sump Pan
  • Foam Closure
  • Girder Filler

Ridge Plates and Valley Plates

  • Function: Designed to provide a seamless and secure connection at the peaks (ridge) and troughs (valley) of the roof metal decking. Ridge and Valley Plates also create a secure point for attaching other roofing materials or systems, such as waterproof membranes, insulation, or metal roofing panels, helping to integrate the structural deck with the roofing system components.
  • Benefits: Ridge plates and valley plates help connect and stabilize adjacent roof deck panels at the ridge or valley. This connection reinforces the roof structure by distributing loads more evenly across the deck, reducing potential flexing or separation at the ridge under wind, snow, and other loads.

Sump Pan

  • Function: Sump pans offer a stable, flat surface to securely allow roof openings for things like drains, vents, plumbing, conduits, and more. This prevents movement and ensures a watertight connection between the roof deck, the penetrating object, and any surrounding waterproofing or insulation materials.
  • Benefits: When properly installed, a sump pan will retain the load carrying capacity of the deck it replaces and transfer loads onto the deck through a reinforced frame while allowing for a penetration through the deck for vents, plumbing, conduits, and more.

Foam Closure

  • Function: Foam closures are shaped to fit the profiles of the metal decking panels and are used to seal the gaps between the panels and flashing or trim.
  • Benefits: They act as barriers against pests, dust, and water, enhancing the building’s energy efficiency by maintaining a more controlled environment. Foam closures also contribute to noise reduction inside the building.

Girder Filler

  • Function: Utilized to fill gaps between girders and the edge of deck panels.
  • Benefits: Enhances load distribution across the deck, improving the structural integrity and stability of the roof system. It also contributes to a more uniform appearance of the deck surface.

Choosing the right accessories for your metal decking project is vital to ensure not only the structural integrity but also the aesthetic finish of your project. At Oates Metal Deck and Building Products, we stand ready to provide you with high-quality accessories that enhance the functionality and longevity of your projects, ensuring they stand the test of time.

Our roof deck accessories, from valley plates to foam closure, are designed to integrate seamlessly with your metal deck installations. By prioritizing compatibility and performance, they not only simplify the construction process but also enhance the structural integrity and longevity of your projects. With our roof deck accessories, you can easily achieve a durable, weather-resistant, and visually appealing rooftop tailored to your project’s specific requirements. Trust in Oates Metal Deck and Building Products to elevate the functionality and aesthetics of your roof metal decking projects with our top-tier accessories.

Why Our Accessories Are Perfect For Your Next Project

The Solution in Metal Decking Accessories

Our accessories stand out in the construction landscape for several reasons, ensuring that your project not only meets but exceeds expectations. Here’s why you should consider our range of accessories for your next project:

  • High-Quality and Reliability: At Oates Metal Deck, we are committed to providing products that you can rely on for their durability and performance. Each accessory is rigorously tested to meet stringent industry standards, ensuring that your projects are built to last.
  • Compatibility and Efficiency: We understand the importance of seamless integration in construction projects. Our accessories are designed to work efficiently with a wide range of materials, ensuring compatibility and enhancing the overall project efficiency.
  • Expert Guidance: Choosing the right accessories can be challenging, but our team of professionals is here to help. With their extensive expertise, they can provide personalized guidance to help you select the perfect products for your project.
  • Complete Solutions as Add-Ons: Our accessories are not just complementary; they are essential add-ons that ensure the success of your metal decking, roofing, and siding projects. They play a critical role in installation, performance, and longevity.
  • Our Commitment to Customer Satisfaction: At the heart of everything we do is our dedication to ensuring your complete satisfaction. We are here to support you from the initial consultation through to the completion of your project, ensuring a smooth and successful process.

At Oates Metal Deck, we don’t just supply accessories; we offer comprehensive solutions tailored to your construction needs, backed by a commitment to excellence and customer satisfaction.

Metal Decking Roof | Oates Metal Deck

Other Accessories and Components

Our Selection Ensures Success

At Oates Metal Deck and Building Products, we understand that the success of your roofing and siding projects relies not just on high-quality metal decks but also on the accessories that complete the installation. Our comprehensive selection extends to metal deck accessories tailored specifically for metal roofing and siding, as well as fiberglass roofing and siding. This ensures that your projects are not only aesthetically pleasing but also structurally sound and weather-resistant. Below is a detailed list of our offerings, designed to meet the diverse needs of our clients.

  • Trim Options: Includes Outside Corner Trim, Inside Corner Trim, Eave Trim, Ridge Trim, and more, designed to provide a perfect finish to all roofing and siding projects.
  • Fasteners: A variety of screw types with washers, ensuring secure attachment of metal panels to the supporting structure.
  • Purlins and Girts: Available in Cee, Zee, Channel, Angle, and Eave shapes to provide support and framing for the metal roofing and siding.
  • Closure Strips: Custom-fitted strips that ensure a snug fit between roofing panels, enhancing insulation and preventing moisture ingress.
  • Caulking Sealant: Our caulking sealant offers excellent adhesion and flexibility, providing a durable, weatherproof seal that prevents water entry and corrosion.

  • Fasteners: Screws designed specifically for fiberglass panels, ensuring a secure and weather-tight installation.
  • Closure Strips: Provide an exact match for corrugated fiberglass panels, preventing leaks and enhancing the overall integrity of the roofing or siding system.

By offering a range of accessories for both metal and fiberglass roofing and siding, Oates Metal Deck and Building Products stands as your all-in-one provider for not just the primary materials but also the essential components that bring your project together seamlessly. Our commitment to quality, durability, and customer satisfaction ensures that every product we offer is of the highest standard.

We invite you to explore our full range of metal deck accessories and see how we can enhance your next roofing or siding project. Contact us today to discuss your specific needs and how our products can provide the solution you’ve been looking for.

Contact Oates Metal Deck and Building Accessories

Metal Decking, Accessories, and More

At Oates Metal Deck and Building Products, we pride ourselves on being your trusted partner for all metal decking and accessory needs. Our extensive experience and commitment to quality and customer satisfaction sets us apart in the industry. Whether you’re in the planning stages or ready to execute your project, our team is equipped to provide expert guidance and high-quality products tailored to your specifications.

  • Expertise and Experience: With years of experience in the industry, we have the knowledge and expertise to guide you through every step of your metal decking project. Our team is well-equipped to provide recommendations tailored to your project’s unique requirements.
  • Quality Assurance: We are committed to providing only the highest quality products. Our closure strips, accessories, and structural components are designed to meet rigid durability and performance standards, ensuring your project’s long-term success.
  • Comprehensive Product Range: Our wide array of metal decking accessories and components means you can find everything you need in one place. From eave struts to ridge vents and insulation, we offer various options to enhance your structure’s functionality and aesthetic appeal.
  • Customer-Centric Service: At Oates Metal Deck, customer satisfaction is our top priority. We go above and beyond to ensure that our clients receive the support and service they deserve, from the initial consultation to the completion of the project.
  • Timely Delivery: We understand the importance of adhering to project timelines. Our efficient order processing and logistics systems ensure your products are delivered on time, helping you keep your project on schedule.
  • Innovative Solutions: Our commitment to innovation means we constantly seek better ways to serve our clients. Whether it’s the latest product developments or cutting-edge techniques, we strive to offer solutions that advance the efficiency and quality of your metal decking projects.

We understand the critical role our products play in your project’s success, and we’re here to support you every step of the way. For unparalleled service and products that elevate your projects, we invite you to contact Oates Metal Deck for your next metal decking project. Trust us to be the strong foundation and finishing touch your project deserves.

Trust Oates Metal Deck and Building Products – Contact Oates Metal Deck today!